Judgment Condition Pattern Configuration

This page is where you set the actual judgment conditions.

Here we will show you how to set the judgment conditions for each judgment method.

Average

To set up the average value judgment, follow the steps below:

1. Select the collaboration task

2. Select the judgment condition pattern

3. Select OR condition (if necessary)

・Collaborative task selection

Clicking the "Select Cooperative Task" button will open the task selection sub-screen.

From this sub-screen, select the task you want to use as a judgment condition.

Selecting the task will add it to the table.

・Judgment condition pattern selection

When you click on the "Judgment condition pattern" column of an added task, it will turn blue and be selected.

When one or more tasks are selected, click the "Level judgment condition setting" button in the middle of the screen to open the judgment condition pattern selection sub-screen,

where you can select the judgment condition pattern you want to use.

The selected judgment condition pattern is displayed in the "Judgment Condition Pattern" column of the table.

Once you have set judgment condition patterns for all tasks, click the "Update" button at the top of the screen.

・OR condition selection

If you want to set an OR condition, click the "OR condition" column of the task you want to set an OR condition for in the same way as setting the judgment condition pattern, select it in red, and then select the OR condition you want to use from the "Set OR condition" button.

Task categories with the same OR condition set will be grouped, and when the judgment condition is cleared for the number of tasks set in that OR condition, the judgment condition for that group will be considered cleared.

OR conditions are a function that you set as needed, so this operation is not necessary if you are not using them.

This completes the setting of judgment conditions for average value judgment.

Clear condition number

To set the judgment conditions based on the number of clear conditions, follow the steps below.

1. Select a linked task

2. Select a judgment condition pattern

3. Select OR conditions (if necessary)

4. Customize judgment conditions

Of these, steps 1 to 3 are the same as when determining the average value, so we will omit them here.

・Custom Judgment Condition Configuration

Unlike average value judgment, when judging the number of clear conditions, you need to adjust and confirm the final judgment conditions.

This operation is performed on the custom configuration screen by clicking the "Custom judgment condition configuration" button on the right side of the screen.

For more information, see the Custom Criteria Configuration page.

Task level

To set up task level judgment, follow the steps below.

1. Select a linked task

2. Set the level judgment conditions

3.  Select OR conditions (if necessary)

When you select a task in the same way as for the average value and number of clear conditions, the following screen will be displayed.

Click on the cells for the level and task for which you want to set the judgment condition to select them, then click the "Set Level Judgment Condition" button.

The task level selection dialog will be displayed, so select the task level you want to set as the judgment condition and click "Set".

Check the contents and if there are no errors, click the "Update" button at the top of the screen to complete the task level judgment settings.

In practice, set the task level of one of the tasks as the judgment condition for all valid talent model levels.

Also, set an OR condition as necessary.

Judgment level reuse

To set the judgment level reuse, follow the steps below.

1. Select the linked carrier model

2. Set the level judgment conditions

3. Select OR conditions (if necessary)

Click the "Select career model" button and select the second hierarchical level of the career model you want to use as the judgment condition from the sub-screen that appears.

The second hierarchical level of the selected career model will be displayed as shown below, so click on the cell where you want to set the judgment condition to select it.

In this state, clicking the "Level Judgment Condition Setting" button will open the Judgment Condition Level Setting screen.

The header row shows the actual level, and the row for each talent model shows the level name.

Click on the "header row" of the level column you want to use as a judgment criterion and that level will be selected as the judgment criterion.

The dialog will close and the following will be displayed.

In this state, the Level 1 of the two selected carrier models is specified as the judgment condition for Level 1.

Check the contents and if there are no errors, click the "Update" button at the top of the screen.

You can also set an OR condition if necessary.

Weighted Average

1. The weighted average judgment can be set up using the following procedure.

2. Select the judgment condition pattern

3. Select the linked task

4. Set the score (weighting)

Click the "Judgment condition pattern" selection button and select the judgment condition pattern to be used from the displayed child screen.